Pipeline DMX Distributor
The unit has two inputs and eight outputs. It features absolute electrical isolation between input and outputs, and between all of the outputs. There are two types of DMX connectors (3-pin) for each individual channel. Each DMX output features an independent driver.
Technical Specifications
Power input: AC120V 50Hz/60Hz
Dimensions: 482 x 130 x 44mm
Weight: 2.6KG
Operating Instructions:
DMX Output: Connect to the DMX receiving device.
DMX Input: From the DMX transmitting device.
Connector pin designation should be as follows:
Pin 1: Signal common (shield)
Pin 2: Dimmer drive complement (data 1-)
Pin 3: Dimmer drive true (data 1+)
Pin 4: Option second data link complement (not used)
Pin 5: Option second data link complement (not used)
Do not exceed the maximum of 32 units per one output channel and use a terminator on the last receiver.
Caution:
This apparatus must be earthed.
Do not apply power source before completely finishing the installation.
Always disconnect from mains before replacing the fuse.
To reduce risk of fire or electrical shock, do not expose to rain or moisture.
Do not remove screws or covers. There are no user serviceable parts inside this unit.
Updating...